Wilson Audio WATCH Center Channel Series 1 User Manual
Page 97
97
If the problem persists:
If the problem is solved:
If the problem persists:
the speaker’s internal wiring.
Continue to the next step.
Turn the amplifier off and disconnect it
from the AC wall outlet. Disconnect the
speaker cable leads to the amplifier and
turn the amplifier on again.
There is a short in the speaker cables.
Check for frayed ends, holes (from spike
feet), or make sure that the spade lug is
not touching the chassis while it is con-
nected to the binding post.
Call the dealer where the amplifier was
purchased. There appears to be a prob-
lem with this component.
S
E C T I O N
7 - T
R O U B L E S H O O T I N G