Wilson Audio WATCH Center Channel Series 1 - Manual (Page 75)

75
S e c t i o n 5 - F i n a l S y s t e m T u n i n g a n d V o i c i n g
This loudspeaker placement method was developed by David A. Wilson, for
Wilson Audio Specialties. The purpose of this method is to find optimum loud-
speaker location in any given room within one hour. Participating in numerous
audio/multi-channel/home theater shows with very different and difficult acoustic
environments necessitated this procedure. Currently, all Wilson Audio dealers
employ this setup procedure for their customers in order to quickly and pre-
dictably achieve the best performance from their systems (This procedure can be
used successfully with ANY moving coil speaker system).
Proper system calibration is the most important step in the setup of your
multi-channel/home theater system. The WATCH system offers increased resolu-
tion and overall system performance. This increased resolution allows you to fine
tune your system, thus increasing overall performance, more than any other system
available.
Fine tuning and “voicing” generally involve only small changes in location
and rotation (or toe) of your multi-channel system. With proper calibration you
will find that changes as small as one inch will have an impact on the performance
of your system. The following sections will step you through this fine tuning
process. The setup will be done as follows:
S
E C T I O N
5 - F
I N A L
S
Y S T E M
T
U N I N G A N D
V
O I C I N G