Wilson Audio WATCH Center Channel Series 1 - Manual (Page 57)

57
above the television and rotated down toward the listening position. The require-
ments for this bracket are outlined at the beginning of Section 4. 5 on page 59. The
speaker should be rotated so that the midrange drivers are firing just below the lis-
tening position. Once you have made and mounted the custom bracket, setup the
Center channel as follows:.
1. Lay the Center Channel on its side.
2. Using provided 3/16” Allen wrench, remove the 4 setscrews from the bot-
tom of the Center Channel.
3. Install the 2” threaded setscrews into the threaded holes on the bottom of
the speaker.
S
E T
S
C R E W
4 P
L A C E S
A
L L E N
K
E Y
E
N D O F
S
E T
S
C R E W
F
I G U R E
1 1 - I
N S TA L L I N G T H E
S
E T
S
C R E W S
S
E C T I O N
4 - WAT C H C
E N T E R
C
H A N N E L
S
E T U P