Section 5.1 - left and right, Determining front to back di, Section 5.1 - left and right channels – Wilson Audio WATCH Center Channel Series 1 User Manual
Page 76: Determining front to back distance

76
• Set up of Left and Right Channels, with all other speakers discon-
nected.
• Add the Center Channel.
• Add the Surround Channels.
• Add the Subwoofer.
Adding one speaker at a time will allow you to easily evaluate the integration
with the system and make the necessary adjustments to fine tune the setup.
S e c t i o n 5 . 1 - L e f t a n d R i g h t C h a n n e l s
D e t e r m i n i n g F r o n t t o B a c k D i s t a n c e
The proper setup of the left and right channels is crucial for optimum sys-
tem performance. If these speakers are not set up correctly, the entire system will
suffer from poor integration. Please follow these steps carefully:
•
Place the speaker in an appropriate location relative to your screen
and listening area. Make certain to remove the grilles and spikes.
•
Toe-in the speakers so that you can just barely see the inside edge
when seated in the primary listening position.
•
Using removable masking tape, graph off the floor so that you can
accurately move both speakers forward and backward in 1/2 inch
increments.
WAT C H C
E N T E R
C
H A N N E L
O
W N E R
’
S
M
A N U A L