Viconics VT7600F Installation Manual - Manual (Page 18)

18 | PIR Ready VT7600 Series-Installation Guide
H) Clock/Day Settings
Clock
set Y/N
This section of the menu permits the user to set the time and day.
Time setting Day setting Time format setting
Time
set? Y/N
No next

Yes down

Day
set? Y/N
No next

Yes down

12/24hrs
set? Y/N
No = exit
Yes down

Time
0:00
Use ▲▼
To set value
Day
Monday
Use ▲▼
To set value
12/24hrs
12 hrs
Use ▲▼
To set value
J) Schedule hold
Schedule
hold Y/N

This menu will only appear on stand-alone (Network Ready) Terminal
Equipment Controller, i.e. without a
BACnet™ / Echelon™ module.

This section of the menu permits the user to set a permanent schedule
hold, which bypasses the internal Terminal Equipment Controller
scheduling.

The permanent schedule hold function is typically used for non-
scheduled events that extend for various periods of time.

Enabling a permanent occupied or permanent unoccupied schedule hold
will cancel any active override.

The use of temporary setpoints during permanent hold is permitted. The
duration of the temporary setpoint is as set per the TOccTime parameter.
Ex. 3 hours
Use ▲▼ to set value, yes key to confirm