VACUUBRAND PC 3001 VARIO emission condenser Peltronic - Manual (Page 24)

page 24 of 120
+
Wear parts have to be replaced regularly.
+
Never operate a defective or damaged pump.
+
Vent the pump before starting maintenance. Isolate the
pump and other components from the vacuum system.
Allow sufficient cooling of the pump. Separate the pump
from the coolant circuit and drain condensate, if appli-
cable.
Ensure that maintenance is done only by suitably trained
and supervised technicians. Ensure that the maintenance
technician is familiar with the safety procedures, which re-
late to the products processed by the pumping system.
Only dismantle the pump as far as necessary.
NOTICE