USL RTP-100 - Manual (Page 9)

9
Macro Commands
In this section you enter the actual button text and commands that will be sent to the macro device. The
numbered buttons beside the fields denote the position on the RTH Macros screen, as well as the number to use
while setting up the buttons for the Manager screen. The command field contains two parts; one defines the
button text and the other the device command. They are separated by a colon character.
Devices – Configurations
This section covers the Devices
Configuration screens (shown in
yellow font across top menus).
This includes Audio, Projector, Media, Automation, Macro and Caption Device Settings. For each configuration
screen, the navigation is the same and includes the Model/Type, IP address, Port and Security Information, Login
and Passcode, if applicable.
The RTP-100s will be created at USL with pre-configured setup. There may be a case when the RTP is shipped the
default configuration settings. Use these screens to select the supported the Model, IP Address and Port, as well
as any login and passcode set on the device, if applicable.
Note: Be sure to scroll to the bottom and touch the SAVE button when altering or changing values. You must
touch the SAVE button to save any changes on any configuration screen.