Replication of the rtp-100 – USL RTP-100 User Manual
Page 11
11
Replication of the RTP-100
When setting up multiple RTP-100s for extended wireless coverage and redundancy,
additional copies of the access points will be required. When configuration and services
are copied from one configured RTP-100 Wireless Server Module to another, it is called
replication. To access the device replication screen, follow these steps.
1. Note the IP address of the MASTER RTP, containing the desired configuration
settings.
2. Connect to the SLAVE RTP, the destination plug with will be receiving configuration
settings from the master (source) RTP.
3. Select the RTM Setup button at the bottom of an RTH
(handheld).
4. Click the RTP Logo on
the Screen to Login. This may require a passcode.
5. Click the bottom “Device” Button.