USL RTP-100 - Manual (Page 10)

10
Network Setup via Handheld
The RTP provides access to the network settings via the handheld by executing the
following steps. This process assumes the RTH has a wireless connection to the RTP
being configured.
1. Touch the RTM Setup icon located at the bottom
center of the Handheld.
2. Click the Login button located in the center top of screen.
3. Type in the provided passcode, if acclicable. Depending on the current
configuration of the device, a passcode may be required to access the setup. USL
recommends that once a system is fully configured, that a passcode be applied
before a theater goes live.
4. Review the menu options as accessed via the buttons along the bottom:
a. System = Ethernet Network connection information.
b. Devices = replication process (see next section).
c. WiFi = Allows changing of Chanel and PW.
d. Power = Allows Reboot & Shutdown of RTH.
Be sure to use the Submit button on each screen to commit changes and note that a
reboot will be required to apply the new settings.