Casio EX-P505 - Manual (Page 82)

82
OTHER RECORDING FUNCTIONS
NOTE
• When proper focusing is not possible because the
subject is closer than the Auto Focus range, the
camera automatically switches to the Macro mode
range (page 84).
• Whenever you perform an optical zoom operation
(page 66) while recording with Auto Focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
Example: AF 40cm -
∞
■ Specifying the Auto Focus Area
You can use the following procedure to change the Auto
Focus area used in the Auto Focus mode and the Macro
mode. Note that the configuration of the focus frame
changes in accordance with the Auto Focus area you
select.
1. In a REC mode, press [MENU].
2. On the “REC” tab, select “AF Area”, and then
press [
̈].
3. Use [
̆] and [̄] to select the Auto Focus area
you want, and then press [SET].