Casio EX-P505 - Manual (Page 125)

125
OTHER RECORDING FUNCTIONS
Assigning Functions to the [
̇] and [̈]
Keys
A “key customization” feature lets you configure the [ ̇]
and [ ̈] keys so they change camera settings whenever
they are pressed in a REC mode. After you configure the
[
̇] and [̈] keys, you can change the setting assigned to
them without going through the menu screen.
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “L/R Key”, and
then press [
̈].
3. Use [ ̆] and [̄] to select the setting you
want, and then press [SET].
• After you assign a function, you can change its
setting simply by pressing the [ ̇] and [̈] keys.
— EV Shift (page 88)
— White Balance (page 91)
— ISO (page 119)
— Metering (page 120)
— Self-timer (page 75)
— Off: No function assigned
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the recording
mode, flash mode, focus mode, white balance mode, ISO
sensitivity, AF Area, self-timer, flash intensity, digital zoom
mode, manual focus position and zoom position. Turning
on mode memory for a mode tells the camera to remember
the status of that mode when you turn off the camera, and
restore it the next time you turn the camera back on. When
mode memory is turned off, the camera automatically
restores the initial factory default setting for the applicable
mode.
— The following table shows what happens when you turn
mode memory on or off for each mode.