Toa VS-900 - Manual (Page 52)

52
Power Source 5 V DC, 24 V DC (supplied from the main frame)
Current Consumption 50 mA (5 V DC), 200 mA (24 V DC)
Supply Power 24 V DC, 80 mA
Number of Lines 2 lines
Conversation Recording Output Audio signal: 0 dB*, unbalanced
Control signal: Open collector output, withstand voltage: 24 V DC,
control current: 20 mA
Other Master station connection monitoring function
Connection Terminal Main frame connection side: DIN connector (64-pin, male)
Line output: 4-pin x 2
Recording audio/control output: 4-pin x 2
Operating Temperature 0 to +40°C
Weight 350 g
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Power Source 20 V AC, 24 V DC
Current Consumption 7 A
Speech Path Configuration Time sharing switch (T1 stage)
Serial port Complies with the RS-232C Standard, D-sub connector (9-pin, female),
2 ports
Installation Method Rack- and wall-mountable
Other Real time clock for time control
Unit's presence/non-presence detection
System programming data maintenance
Power switch
Connection Terminal Bus connector: DIN connector (64-pin, female) x 9
PU-200 connection terminal: 4-pin x 2 (2 PU-200s are connectable.)
24 V DC input terminal:
4-pin (with grounding terminal)
Operating Temperature 0 to +40°C
Finish Pre-coated steel plate, black, 30% gloss
Dimensions 420 (w) x 443.7 (h) x 288.3 (d) mm (excluding the rack mounting bracket)
Weight 12.7 kg
15. SPECIFICATIONS
[VS-900MF Main Frame]
[VS-900MS Master Station Interface Card]
4-pin dedicated connector ............................... 4
Ferrite clamp SFC-10 ...................................... 2
Rack mounting bracket ................................... 2
Machine screw (M4 x 10) ................................ 6
Cable clip ...................................................... 20
4-pin dedicated connector ............................... 3
CR2032 battery ............................................... 1
Floppy disk (PC setting software) ................... 2 VS-900 operating instructions ......................... 1
VS-900 installation manual (this manual) ....... 1
VS-900 setup software manual ....................... 1
Rack mounting screw ...................................... 8
Rack mounting washer ................................... 8
Ferrite clamp SFC-10 ...................................... 1
• Accessories
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.