Toa VS-900 - Manual (Page 13)

13
9. INSTALLATION AND CONNECTION PROCEDURES
(1) System Design
(2) Equipment Installation
(4) Connecting the Station/Outside Line to Each Exchange Card
(3) Installing a Card in the VS-900MF Main Frame
(6) Connecting the VS-900MF Main Frame to a PC
(7) Adjusting the Station and Exchange
(8) Speech and Function Tests
(5) Tie-Line Connection (between Exchanges)
Exchange/Station Configuration, Wiring Schedule and Station Numbering Schedule
Installing the VS-900MF Main Frame in an Equipment Rack or on a Wall (See p. 14.)
Installing the PU-200 Power Transformer in an Equipment Rack or on a Wall (See p. 16.)
Installing the Substation and the Option Handset (See p. 18 and 19.)
Installing the Master Station (See p. 20.)
Installing the Site Connector (See p. 21.)
• MS-900 Master Station vs. VS-900MS Card
• External Recording Device vs. VS-900MS Card (See p. 26.)
(See p. 28.)
• Telephone vs. VS-900AL Card
• External Recording Device vs. VS-900AL Card (See p. 30.)
(See p. 32.)
• Substation vs. VS-900RS Card
• External Amplifier vs. VS-900RS Card (See p. 33.)
(See p. 34.)
• Outside Line vs. VS-900CO Card
• External Recording Device vs. VS-900CO Card (See p. 36.)
(See p. 37.)
• External Amplifier vs. VS-900AF Card
• External Recording Device vs. VS-900AF Card (See p. 38.)
(See p. 39.)
VS-900MF Main Frame vs. PU-200 Power Transformer (See p. 46.)
Installing the Data Backup Battery (See p. 22.)
Installing and Connecting Each Card (See p. 23.)
• Full-Duplex Substation vs. VS-910RS Card (See p. 35.)
Connection to a Programming PC (See p. 47.)
Connection to an Operation Log PC (See p. 49.)
System Programming (See the "VS-900 SETUP SOFTWARE MANUAL.")
Master Station Microphone Sensitivity/Speaker Volume Adjustment (See p. 29.)
Telephone Volume Adjustment (VS-900AL Card) (See p. 31.)
Speech Test (See p. 51.)
Function Test (See p. 51.)
VS-900TI vs. VS-900TI (See p. 40.)
VS-900SC (See p. 43.)
Power-ON