Toa C-PH200 - Manual (Page 6)

6
Camera mounting plate
Attach a camera housing (C-CH200 Series,
C-CH100 and C-CH100FH) to this plate.
Refer to p. 11.
Housing mounting slot
Used to mount a camera housing. Refer to p. 11.
Cable clamp
Fixes housing cables. Refer to p. 11.
Pan/tilt head
mounting hole
Cam fixing screw
(for horizontal rotation angle adjustment)
Horizontal rotation angle is adjustable in the
range of 175
°
(left) to 175
°
(right). Both left and
right angles are factory-preset to 175
°
.
Refer to p. 8.
Cam fixing screw
(for vertical rotation angle adjustment)
Vertical rotation angle is adjustable in the
range of 20
°
(upward) and 70
°
(downward).
Upward angle is factory-preset to 20
°
and
downward angle to 70
°
. Refer to p. 8.
Control input cable bushing
Run the pan/tilt head control cable through this bushing. Refer to p. 9.
Coaxial cable bushing
Run the video signal cable through this bushing. Refer to p. 9.
Housing cable
Used for connections to a camera housing.
4. NOMENCLATURE AND FUNCTIONS