Toa C-PH200 - Manual (Page 10)

10
Terminal
Video connection terminal
Bushing plate
Coaxial cable
Control input cable
Bushing for coaxial cable
Applicable cable diameter: 4 – 8 mm Bushing for control input cable
Applicable cable diameter: 13 – 18 mm
3. Connect lead wires to the terminal.
Note
Take care not to confuse the upper terminal with the lower terminal when making terminal connections.
5.5. Coaxial Cable End Processing
Process the coaxial cable end as follows:
5.5.1. 3C-2V Cable
1. Strip the cable sheath 20 mm from the cable end.
2. Bend back braided copper shields over the cable sheath, then remove
the insulating material 15 mm from the cable end.
5.5.2. 5C-2V Cable
1. Strip the cable sheath 30 mm from the cable end, and braided copper
shields 20 mm.
2. Remove the insulating material 15 mm from the cable end.