Toa C-PH200 - Manual (Page 15)

15
24 VAC, 50/60 Hz
46 VA
Video signal : Applicable diameter : ш4 – ш8 mm
Screw terminal for 3C-2V or 5C-2V
Powercontrol: Applicable diameter : ш13 – ш18 mm
M3 screw terminal (12 P) with free terminal screw x 2
Output line : Connected to the housing using dedicated cable
Tilt : –70 to +20°±5°
Pan : Over 340°(automatic reverse), 350°±5°(manual operation)
Tilt : 3°±0.5°/sec (50 Hz), 3.6°±0.6°/sec (60 Hz)
Pan : 6°±0.5°/sec (50 Hz), 7.2°±0.6°/sec (60 Hz)
Vertical : 15 minutes
Horizontal : Continuous
5,000 hours or 200,000 reverse operations
11 kg (upright installation)
10 kg (indoor suspension)
IP-54
(Waterproof capability only applies to upright installation.)
Operable at average wind velocity of 40 m/s or less.
Not destructed at maximum wind velocity of 60 m/s (provided the unit is installed
at a height of 15 m above the ground and C-CH200 Series camera housings are
mounted)
Indoors and outdoors (except seaside and industrial districts where the unit is
subject to corrosion, and heights that expose the unit to strong wind pressure)
Because a waterproof function is disabled, unit cannot be installed in a
suspended position outdoors.
–10° to +50° (standard specifications and not frozen)
30 to 90% RH (relative humidity)
Die-cast aluminum and anti-corrosion aluminum plate, off white, powder coating
190 (W) x 282 (H) x 313 (D) mm
10.2 kg
Camera housing : C-CH200 series, C-CH100 series
Wall mounting bracket : C-BC200K
Power Source
Power Consumption
Input/Output Lines
Rotation Angle
Operation Speed
(No load)
Rated Time
Auto-Pan Life
Load Rating
Waterproof / Dustproof
Capability
Wind Pressure
Applications
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Applicable Model
Option
Note: Specifications and external view of the C-PH200 Pan/Tilt Head are subject to change without notice.
7. SPECIFICATIONS