Toa HY-CN7W-WP - Manual (Page 6)

6
Suspension bracket
(accessory of HX-7B
or HX-7W)
For installation method of suspension brackets,
refer to the Installation manual supplied with
the HX-7B or HX-7W.
Note: Optional HY-PF7B or HY-PF7W Speaker Rigging
Frames can also be used.
Rear bracket
Suspension bracket
(accessory of HX-7B
or HX-7W)
Rear angle bar
Rear bracket
5. INSTALLING JOINeD SpeAker SYSTeMS
Joined HX-7B or HX-7W speaker systems can be suspended.
5.1. Vertically Suspended Installation
After joining together the speaker systems, attach their supplied suspension brackets (2 places) and suspend
the joined speaker from the three points shown in the figure.
5.2. Horizontally Suspended Installation
After joining together the speaker systems, attach their supplied suspension brackets (4 places) and suspend
the joined speaker from the three points shown in the figure.
(Indoor installations only)