Toa HY-CN7W-WP - Manual (Page 4)

4
Speaker molule A Speaker molule B
Speaker molule A
Protection cover
Remove the protection cover from the side angle
plate before joining.
Speaker molule B
Rubber ring Speacer (golden)
Hex head bolt M6 x 12
(with spring and plain washers)
Tightening torque: 3 N·m
Speaker molule A Speaker molule B
Step 2. Join the side angle plates of speaker module A to those of speaker module B.
Join the side angle plates using the supplied bolts, spacers and rubber rings.
Step 3. Join the rear bracket of speaker module A to that of speaker module B using the HY-CN7 bracket's rear
angle bar.
Similarly, join the side angle plate on the opposite side of the speaker module.