Toa DP-K1 - Manual (Page 6)

6
5. NOMENCLATURE AND FUNCTIONS
5.1. DP-K1 Digital Audio Processor
[Front]
1. Power lamp
Lights when the power switch is set to ON.
2. Preset knob
Rotating this knob recalls the preset memory.
Holding down it for 5 seconds or more locks or
unlocks the knob.
The numbers and dots marked around the knob
are LED indicators. They indicate the currently
recalled memory number or communication state
between the DP-K1 and the PC. For details, refer
to p. 13 and 14.
3. Input channel indicators
Each indicator lights green when an input signal
level is –40 dB or higher on the basis of the rated
level.
4. Output channel indicators
Each indicator lights green when an output signal
level is –40 dB or higher on the basis of the rated
level.
5. Network connection terminal
Connects to 10 Base-T/100 Base-TX networks.
(RJ45 Ethernet jack)
When connecting the unit to a switching hub, use
a UTP Category 5 straight through cable fitted with
RJ45 connectors.
When connecting the unit to a PC directly, use a
UTP Category 5 cross cable fitted with RJ45
connectors.
Note
You can reposition this terminal to the rear panel.
(Refer to the next page, No. 9 "Network
connection terminal panel.")
5
1 2 3 4
[Inside of the pocket cover]