Toa DP-K1 - Manual (Page 10)

10
5.2.7. D-937SP Digital Input Module
11. Optical Input Terminal [OPTICAL, 1,2]
Optical input terminal of S/PDIF format.
12. Coaxial Input Terminal [COAXIAL 3, 4]
Coaxial input terminal of S/PDIF format.
Notes
• Use a coaxial cable with characteristic impedance of 75 Ω for
connection.
• One of four line inputs (stereo) is selected. Input selection is performed
by a PC using the setting software supplied with the DP-K1.
model D-937SP
DIGITAL INPUT MODULE
1
3
2
4
COAXIAL
OPTICAL
DIGITAL IN
11
12
5.2.8. D-971M Line Output Module
13. Monaural Output Terminal [1, 2, 3, 4] (XLR-3-32 equivalent)
Electronically-balanced output terminal.
(Pin 1: Ground; Pin 2: Hot; Pin 3: Cold)
Output signal level: +4dB
Use XLR-3-11C or equivalent for connection.
ACCESSORY I.T.E 78CK
4
3
2
1
LINE OUTPUT MODULE
[+4 dB]
model D-971M
1
2
3 : E
: H
: C
13
2: Hot
1: Ground
3: Cold
5.2.6. D-923AE Digital Input Module
10. AES/EBU Digital Input Terminal [AES/EBU, 1/2]
(XLR-3-31 equivalent)
Digital input terminal of AES/EBU format.
(Pin 1: Ground; Pin 2: Signal; Pin 3: Signal)
Use the XLR-3-12C or its equivalent for
connection.
Note
Use a digital audio cable with characteristic
impedance of 110 Ω for connection.
model D-923AE
DIGITAL INPUT MODULE
1/2
AES/EBU
DIGITAL IN
10
2: Signal
1: Ground
3: Signal