Tii HNX-ET - Manual (Page 14)

P/N: 92226802
Rev A 5/08
14
Uninstallation:
1. To uninstall the Configuration Utility, go to the Control Panel of your system.
2. Open the Add/Remove Programs.
3. Select and double click on the PowerPacket Ethernet Adapter in the Add/Remove
Programs Properties.
4. Follow the on screen instructions to uninstall the PowerPacket Utility.
Note…
If there is no connection/link among the HomePlug adaptors with the
Ethernet cable inserted or ping test between the HomePlug adaptors is
not successful, please power the HomePlug adaptors off and on again.
You can also unplug the HomePlug adaptor and then plug in again in
the presence of the Ethernet.
Note…
1. Before connecting the HomePlug Ethernet Adaptor, please note its
Security ID / Device Password and keep it available for configuration of
the network.
2. No drivers are required for installation of the HomePlug Ethernet
Adaptor.