5 parts and controls 15, 1 bottom panel 15, Figure 2 9141 back panel and bottom 15 – ThermoWorks 9141 HART SCIENTIFIC FIELD DRY-WELL TEMPERATURE CALIBRATORS User Manual

Page 19: Parts and controls, Bottom panel, Figure 2, 9141 back panel and bottom, 5parts and controls, 1 bottom panel

Text mode
Original mode

Parts and Controls

The user should become familiar with the dry-well calibrator and its parts.

5.1

Bottom Panel

Figure 2 on page 15.

Power Cord - Underneath the calibrator is the removable power cord inlet that
plugs into an IEC grounded socket.

Power Switch - The power switch is located on the power entry module
(PEM). The PEM also houses the fuses and the dual voltage selector. The PEM
and Heater Voltage Switch (see below) allow the unit to be field switchable for
115 VAC (±10%) or 230 VAC (±10%) operation.

5 Parts and Controls

Bottom Panel

Figure 2 9141 Back Panel and Bottom