Fieldpilot, Install mounting brackets on fieldpilot valve, Mount valve bracket on vehicle – TeeJet FieldPilot Install AgChem 1803 User Manual

Page 11

www.teejet.com

FieldPilot

2. INSTALL MOUNTING BRACKETS ON FIELDPILOT VALVE.

Using the bolts and nuts

and

attach the valve block to the bracket

(M)

so that the ribbed part of the

bracket is pointed away from the valve block.
Figure 1-3: Install the Mounting Bracket

3. MOUNT VALVE BRACKET ON VEHICLE

The valve is mounted on the rear face of the tool cabinet located on the left side of the vehicle. Hold the valve

and bracket assembly in place to ensure clearance for the hoses (which will be attached later) and to position

the valve so it does not protrude outside the clearance of the tool box. Use the position of this assembly to

choose the best place to drill a hole in the forward face of the toolbox. Drill a single hole large enough to

accept the 5/8 inch mounting bolt

(J)

, 11/16” is recommended.

Use the 5/8-11 x 1.5” bolt and Nyloc nut

and

to firmly attach the valve and bracket assembly to the

toolbox.
Figure 1-4: Mount Valve Bracket on Vehicle