TeeJet LH 1200S User Manual
Page 21
LH 1200S O
PERATORS MANUAL
LH A
GRO
21
Boom sections1-9:
Key
Operation
Pressing this key displays the following:
1 is displayed on the left-hand side of the display. This indicates that the width of
boom section 1 from the left of the boom can be encoded.
00 is displayed on the right-hand side of the display if the monitor has not been
encoded previously, otherwise the last encoded value is displayed. This value is
the width of the boom section furthest to the left, the encoded value should
correspond to the number of nozzles on this section. This presupposes that the
distance between the nozzles is 50 cm.
Once the number of nozzles has been encoded, press the working width key
again, and the display changes to boom section 2. Repeat the process again and
all of the boom sections can be encoded one by one from the left to the right.
The monitor can work with up to 9 sections. When all of the required boom
sections have been encoded, page through the remaining sections ensuring that
the unused sections have a value of 0. Boom section encoding cannot be exited
by other means.