TeeJet 500 SLURRY COMPUTER - Manual (Page 22)

D ATA /D ELETE T EE J ET 500 S LURRY COMPUTER OPERATORS MANUAL
22
NEW COUNTER
It is possible to have up to ten different trip counter sets (tasks) that can be started
and stopped when, e.g. changing fields. These counter sets can be printed if an in-
cab printer (TeeJet No. 905-244) is connected to the TeeJet 500.
When starting a new task all the counters are zeroed. If another task is selected
and then the original task is selected again the counters will continue with the
same values from when the task was stopped.
The tasks can be reset one by one.
Note: In the display headline the active counter number is displayed. If the counter
has been named (see below), the name will appear instead of the trip counter
number.
NAME COUNTER
>> Make sure that the counter to be named is selected in the “New counter” menu
(see above).
>> Highlight “Name counter” and press Enter.
>> Press the Up/Down select keys to select character.
>> Press Enter to select character and navigate on to the next character.
>> Press Escape once when the name is completed.
>> Press Enter immediately after to save the encoded name.
DELETE COUNTER
>> Select the counter to be deleted in the “New counter” menu (see above).
>> Highlight the “Delete Counter” option
>> Press Enter to delete the counter.
Note: When deleting a counter the user will be prompted with a warning to confirm
the action. If the trip counter has been named the user will be given the option to
not delete the name, only the counter values.