TeeJet 500 SLURRY COMPUTER - Manual (Page 11)

T EE J ET 500 S LURRY COMPUTER OPERATORS MANUAL O PERATION
11
OPERATION
THE USER SELECTABLE FUNCTIONS
Symbol Description
Area:
The total measured area since the start of the task or since the
last reset. See “Trip counter” on page 21.
Distance:
The driven distance since the last reset (see page 21).
The measured distance is displayed in metres up to 9999 m.
Hereafter the measure distance is displayed as kilometres (99.99,
999.9, 9999)
“Km” instead of “m” is displayed in the symbol when the displayed
distance changes to km.
Distance measurement is started and stopped by the selected
implement sensor so distance is only measured when spreading.
Distance can be measured during transport by using the
transport menu, see page 19.
Forward speed:
The present forward speed shown as kilometres per hour.
Trip tons:
The trip amount spread since the last reset.
The procedure for resetting a counter can be seen on page 21
Tons or M
3
left:
The amount, in tons or M 3 , remaining in the tank.
Distance left:
The distance that can be covered with the current tank content.
This calculated figure is based on the present volume in the tank,
the actual application rate and the current working width
WARNINGS
Situations can arise that cause a warning to be given under operation.
The various warnings can be cancelled by pressing the “C” key.
The description and procedure for setting the different warnings can be seen on
page 12.
The reason for the given warning should be checked thoroughly before
cancelling the warning!