TeeJet 500 SLURRY COMPUTER - Manual (Page 12)

S ETTINGS T EE J ET 500 S LURRY COMPUTER OPERATORS MANUAL
12
SETTINGS
OPERATION SETTINGS
All setting related to daily operation are encoded under the “Operation settings”
menu. A description of each menu item follows:
APPLICATION RATE
Encode the required application rate here in tons per ha or M 3 per ha depending
on which rate type has been selected as described on page 25.
WORKING WIDTH
Encode the working width of the used boom, injector, etc. in metres.
Key Description
Encode the number of outlets that are not used by pressing this
key.
Note!
Select whether the slurry from the outlets that are not used
is sent return to the tank or not under “Machine settings”
(return on/off, see page 14).
STEP RATE
Encode the step rate value in percent. This step value is the same for both
increasing and decreasing the application rate. The maximum value that can be
encoded is 99%.