TC-Helicon VoiceSupport Manual - Manual (Page 9)

Common Tasks 7
© 2011 TC-Helicon Vocal Technologies
Learn more about updating your firmware.
3.3 Restoring your presets
This section describes how to restore your presets from an Archive. For more detailed information on
the preset page, go to the
Presets section.
1. Connect your product via USB.
2. Run VoiceSupport.
3. Confirm your product is selected. A connected product appears at the bottom left hand corner of the
window in blue.
4. Select the Presets page. Archives for your connected product are shown below the Working Data
window.