SUUNTO FAVOR S - Manual (Page 51)

51
5. CARE AND MAINTENANCE
The dive computer is a sophisticated precision instrument. Remember to treat it as such! It has been designed to withstand
the rigors of scuba diving. It can be installed in a durable thermoplastic console boot and its display can be protected by
a replaceable display shield.
The user should wash and rinse the unit in fresh water after every use. Protect it from shocks, extreme heat or direct
sunlight and chemical attack. The instrument cannot withstand the impact of heavy objects like scuba cylinders, nor
chemicals like acetone and alcohols (ethanol, isopropanol).
NOTE: Keep the water contacts clean to assure correct operation of the dive computer. Store the instrument in a dry
place.
NOTE: Frequently check the battery compartment for moisture through the transparent battery cover of the instrument
especially after the battery replacement.
The dive computer should be serviced every two years or after 300 dives (whichever comes first) by an authorized dealer.
This service will include a general operational check and battery replacement. The service requires special tools and
training. Therefore, it is advisable to contact an authorized Suunto dealer for biennial service. Do not attempt to do any
servicing that you are not trained for.
The instrument will display a battery symbol as a warning when the power gets too low. When this happens, the dive
computer should not be used until the battery has been replaced (see also chapter 3.2.1 /Battery Warning).