SUUNTO FAVOR S - Manual (Page 25)

25
3.2.3 Calendar Clock Function
The calendar clock is always shown on the display, when the instrument is deactivated.
Once the dive computer is activated the TIME display can be retrieved any time on
the surface mode by touching the TIME/MODE and COM contacts for about two
seconds. The current time and date will be shown for four seconds (Fig. 3.7).
When diving, the dive entry time and date is registered in the logbook memory.
Remember always to check before diving that the clock is set, especially when
traveling to different time zones. For adjusting the clock, refer to Section 4.4, “Setting
Time and Date”.
In the metric version of the instrument, the 24-hour time system is used, while in the
imperial version the 12-hour time system is used.
Fig. 3.7 TIME DISPLAY
The time is 10:30 [in case of imperial
unit, A for a.m. and P for p.m. would be
shown in the upper left corner of the
display]. The date is 18.2 or February
18th. PLEASE NOTE: The date will
always be displayed with the day of the
month first, followed by the month.