SUUNTO FAVOR S - Manual (Page 20)

20
When the TIME/MODE and COM contacts are touched for over three seconds, the display will start to scroll through the
following modes. Lift your fingers when the desired mode is displayed:
Logbook memory: at LOG the logbook memory is accessed.
Dive history memory: at HIS the history memory is accessed.
Personal/altitude setting: at Alt the personal and/or altitude adjustment can be set.
Time setting: at Set the time and date can be adjusted.
Return: you can at any time exit the above modes by touching all three contacts at the same
time. First make contact between the PLAN/ON and TIME/MODE contacts, e.g. by
covering both contacts with your right thumb. Without lifting your right thumb, touch
the COM contact with your left thumb. Alternatively, you can exit the modes simply
by submerging the dive computer in water.
You may sometimes encounter problems in using the contacts, or the instrument may activate on its own. The reason for this
is probably contamination or invisible marine growth that may create an unwanted electric current between the water
contacts. It is therefore important that the dive computer be carefully washed in fresh water after the day’s diving is
completed. The contacts can be cleaned with a soft pencil eraser.