SUUNTO FAVOR S - Manual (Page 49)

49
In these figures the contacts which are connected are shadowed.
Thus, to correct the time, do as follows:
1. Activate the Time Setting mode by connecting the TIME/MODE and COM contacts
continuously to scroll through the menu. Release your fingers immediately when Set
appears on the display. The Time Setting display will now be shown (Fig. 4.12).
2. The hour display starts to blink immediately (Fig. 4.12). If you want to change it, keep
the PLAN/ON and COM contacts connected. The hours will start to scroll (Fig. 4.13).
Release your fingers immediately when the correct value is displayed. [To change the A
or P for a.m. or p.m. scroll the hours past 12:00].
3. To scroll through the minute, month and date, keep the TIME/MODE and COM con-
tacts connected. Release your fingers when the display you wish to change is blinking
(Fig. 4.14). Repeat step 2 to change this value (Fig. 4.15).
NOTE: In case of the minutes and date, the change is made separately for both digits, as
shown by the blinking digit. In case of the hours and month, the complete number is
changed simultaneously.
4. Repeat steps 2 and 3 to change any additional values.
Fig. 4.13 TIME SETTING
Adjusting the hour reading, PLAN/ON
& COM.
Fig. 4.12 TIME SETTING
Ready to adjust the hour reading
(blinking).
COM
TIME
MODE
PLAN
ON
LOG HIS ALT SET PLAN
R
A T
E
A
S C m