SUUNTO FAVOR S - Manual (Page 44)

44
DISPLAY II (Fig. 4.3):
• average depth (a)
• surface interval time before dive (b)
• temperature at the maximum depth (c)
• dive time
DISPLAY III (Fig. 4.4):
• dive entry time and date
The data of the most recent dive is shown first as DIVE 1 (the first dive in the mem-
ory). Preceding dives are recalled by touching the TIME/MODE and COM contacts.
A brief touch of the contact will bring you to the previous dive (DIVE 2), continuous
contact scrolls backwards through the dives (DIVE 3, ... DIVE 9, DIVE 1 again etc.).
Only DISPLAY I is shown, while scrolling the dives. The desired dive is selected by
breaking the contact when that dive appears on the display.
When new dives are added after nine dives, the oldest dives are deleted. The memory
will always retain the nine most recent dives. The contents of the memory will remain
even when the battery is changed (assuming that the replacement has been done ac-
cording to the instructions).
.
LOG HIS ALT SET PLAN
R
A
T
E
A
S
C
NO
C
DIVE
TIME
SURF TIME
a
b
c
LOG HIS ALT SET PLAN
R
A
T
E
A
S
C
Fig 4.4 LOGBOOK, DISPLAY III
The dive started on the 18th of August (8) at 8:26 [when set to
imperial version, A for a.m or P for p.m. are also shown in the upper
left corner of the display].
Fig 4.3 LOGBOOK, DISPLAY II
The average depth of the dive was 18.2 m
[60 ft] (a), surface interval time before the
dive 10 h 38 min (b) and temperature at the
maximum depth 20°C [68°F] (c).