Sterling Scale 825 - Manual (Page 18)

_____________________________________________________________________________________________________________
Revision 4.4 Copyright ©2004Sterling Scale Co., Inc. March 2005
Web Site: www.sterlingscale.com E-mail: [email protected]
Typical Counting Operation
Typical Fixed Sample Counting Operation
1. Use the SCALE SELECT key and ZERO key to zero all available scales.
2.
Place items to be sampled onto the sample scale.
3.
Press and hold the COUNT key. The indicator will toggle through all
allowable sample sizes, starting with the current sample size. When the
desired sample size is displayed release the COUNT key. The indicator
will sample the pieces, switch to the count scale and display the count.
4.
If a container is needed to hold items being counted, then place it onto
the count scale and press the TARE key.
5.
Place all items to be counted onto the count scale, the indicator will
display the total number of items.
6. Press
the PRINT key to output the specified output format.
7. Press
the RESET key to return to the Weigh Mode.
OPERATION
Page 16
Scale Select is used between scale 1 and scale 2 when the second scale option
is installed.
The COUNT key is used to enter the Count operation. Pressing and holding the
COUNT key when the weight is displayed will scroll through the sample choices
and when released, display the parts count or enter the number of samples
placed on the sample scale and press the COUNT key for variable sampling
counting.
Pressing and holding the APW key when the count is displayed will display the
average part weight.