StarTech.com SV1115IPEXEU - Manual (Page 7)

Instruction Manual
3
Installation
Connecting to the Host Computer and Network
Follow these instructions if the host computer uses a PS/2 keyboard and mouse:
1. Power down the computer to which the SV1115IPEXT will be connected (host
computer). If purchased, install the unit in your rack or cabinet following the
instructions that came with the 1110EXTRACK (optional, not included).
2. If present, disconnect the existing monitor and PS/2 keyboard/mouse from the host computer.
3. Using the provided integrated KVM cable, locate the end with the male VGA
(monitor) connector and connect it to the VGA-out connector on the back of the
host computer.
4. Connect the PS/2 keyboard and mouse connectors on the same end of the integrated
KVM cable as the male VGA connection you completed in the previous step.
Remote User
Local keyboard/mouse/monitor
(native PS/2 or optional USB)
VGA port
(Host)
PS/2 Keyboard
(Host)
PS/2 Mouse
(Host)
USB port
(Host)
RJ45 port
(WAN)
RJ45 port
(LAN)
Serial port
(DCE)
Power
connector 1
Power
connector 2