StarTech.com SV1115IPEXEU - Manual (Page 13)

Instruction Manual
9
Alternatively, you may press the Setup button on the front panel, and you will not be
asked to enter the admin password if you just press Enter.
At the main OSD menu (pictured below), you will be given several basic setup options.
To configure SV1115IPEXT to your required network settings, use the Network Setup
Wizard. To select from the menus provided, use the arrow keys on your keyboard. At
any time, you can return to the previous menu by pressing the Page Up key.
Web Configuration Using DHCP
This method requires that your network implement DHCP (Dynamic Host
Configuration Protocol), usually on a server or network access device such as a router
that dynamically allows devices to join the network without pre-configuration. It
also assumes that you will have easy access to your network’s DHCP log, since you
will need to know the IP address of the unit to complete the configuration over your
Web browser. (If you are unsure of how to access your network’s DHCP log, contact
your System Administrator for details.) If the unit is powered on and connected to the
network via LAN port on the rear panel, it will automatically attempt to lease an IP
address using DHCP. Before you can begin the configuration process, you will need to
access the DHCP log from your file server or other device that acts as the DHCP server
on the network. A simple DHCP log looks similar to the following: