Required cables and hardware – StarTech.com SV1115IPEXEU User Manual
Page 6
Instruction Manual
2
Required Cables and Hardware
The included integrated KVM cable will allow you to connect the SV1115IPEXT to
most IBM compatible computers. Depending on your requirements and how you
wish to handle the initial configuration of the unit, you may wish to use the following
additional cables and hardware.
All applications
• Straight-through Ethernet patch cable (to connect the unit to your LAN)
StarTech.com part number: M45PATCHxxxx
To use the optional dedicated WAN port
• An additional straight-through Ethernet patch cable to connect the unit directly to a
dedicated WAN/Internet connection
StarTech.com part number: M45PATCHxxxx
Configuration via serial port
• Straight-through RS-232 serial cable with 9-pin DB9 male/female connectors
StarTech.com part number: MXT100
–or—
• Null modem RS-232 serial cable with 9-pin DB-9 female/female connectors
StarTech.com part number: SCNM9FF
To use USB connections on host and/or virtual disk emulation
• USB Type A to B cable
StarTech.com part number: USBFAB_3
To install the SV1115IPEXT into a rack or cabinet
• Rack kit (supports up to two units)
StarTech.com part number: 1110EXTRACK