Casio Printer CW-75 - Manual (Page 51)

49 E
Clearing the All Text
Use the following steps to clear all input text that is currently on the input
screen.
To clear all text
1.
Press FUNCTION and then BS (CLS).
2. In response to the confirmation message that appears, press SET.
• This clears all the text from the input screen.
• If you want to abort the clear operation without deleting anything, press
ESC in place of SET.
Text Editing
You can set up the label printer so it either overwrites existing characters with
new input, or inserts new input between existing characters. Note the follow-
ing example.
Example
Existing text: ABCDEFGHI
Cursor location: E
New input: XXX
Overwrite
Result: ABCDXXXHI
Insert
Result: ABCDXXXEFGHI
To switch between overwrite and insert
1.
Press SET UP to display the SET UP menu.
2. Use the cursor keys to select “INPUT” and then press SET.
3. On the next screen that appears, use the cursor keys to select “INSERT”,
or “OVERWRITE” and then press SET.
• The CAPS indicator on the display is highlighted when overwrite is turned
on. The CAPS indicator appears normally (unhighlighted) when insert is
turned on.