beautypg.com

Wiring diagram – SilentKnight IPGSM-4G User Manual

Page 15

background image

Wiring Diagram

The wiring diagram below is depicted for point-to-point electrical connection checks used for troubleshooting or compo-

nent replacement. It is not intended to show the physical routing of wires. When replacing a wire or component, en-

sure the wire is routed in the same manner as the original factory wire. (Note: Wire colors may vary.)

NOTES

All circuits are power limited except the backup battery which is non-power limited.

Non-power limited wiring must be separated from the power limited wiring by at least 1/4 inch.

If desired, use a Honeywell 955WH Tamper Switch with the 28-2 bracket.