Shellab SRI20P - Manual (Page 4)

4 | P a g e
INTRODUCTION
Thank you for purchasing a Sheldon Manufacturing refrigerated BOD Peltier incubator. We know that in
today’s competitive marketplace, customers have many choices when it comes to constant temperature
equipment. We appreciate you choosing ours. Our continued reputation as a leading laboratory product
manufacturer rests with your satisfaction. Sheldon Manufacturing, Inc. stands behind our products, and
we will be here if you need us.
These incubators are intended for professional, industrial, or educational use as BOD incubators. They
are not designed for use in hazardous or household locations.
Before you use the incubator read this entire manual carefully to understand how to install, operate, and
maintain the incubator in a safe manner. Keep this manual available for use by all incubator operators.
Ensure that all operators are given appropriate training before the incubator begins service.
Note: This unit is not designed or intended for the growth, cultivation, incubation, or storage of fruit flies
(Drosophila melanogaster). Improper use of this unit, including use with fruit flies, will void any
warranty. Other units are specifically manufactured for fruit fly application, and you should consult
your Shel Lab dealer or customer service representative in order to identify another model suitable
for your application.
G ENERAL S AFETY C ONSIDERATIONS
Your incubator and its recommended accessories are designed and tested to meet strict safety
requirements. Only use this equipment for its intended application; any alterations or modifications void
the warranty. Failure to follow the guidelines and instructions in this manual may create a protection
impairment by disabling or interfering with the unit’s safety features. This can result in injury or death.
For continued safe operation of your incubator, always follow basic safety precautions including:
 Follow all local or regional ordinances in your area regarding the use of this unit. If you have any
questions about local regulations, please contact the appropriate local agency.
 Use only approved accessories. Do not modify system components. Any alterations or
modifications to your incubator can be dangerous and void your warranty.
 Always plug the incubator power cord into an earth grounded electrical outlet that conforms to
national and local electrical codes. If the incubator is not grounded properly, parts such as knobs
and controls can conduct electricity and cause serious injury.
 Avoid damaging the power cord. Do not bend it excessively, step on it, or place heavy objects on
it. A damaged cord can be a shock or fire hazard. Never use a power cord if it is damaged.
 Do not position the incubator in such a manner as to make it difficult to unplug the unit in the
event of an emergency.
 Do not attempt to move the incubator while in operation.