Installation (continued) – Shellab SRI20P User Manual
Page 13
.
13 |
P a g e
INSTALLATION (CONTINUED)
SRI6P and SRI20P Standard Shelving Installation
Perform the following steps to install the SRI6P and SRI20P incubator standard shelves:
Figure 3: Standard Shelf Mounting Bracket Installation
1. Laterally insert the
mounting bracket’s 2 pairs of twin tabs (front and back) into the slots on the
sides of the incubator chamber.
2. Slide the bracket down so that the tabs are securely seated in the mounting slots.
3. Repeat the process on the opposite side of the chamber with the second mounting bracket.
Figure 4: Standard Mounting
Bracket Installed
4. Hang 1 shelf off the 2 installed mounting brackets.
Figure 5: Standard Shelf Hung
From Mounting Bracket