Receiving your incubator, Inspecting the shipment, Nspecting the – Shellab SCO31 User Manual
Page 6: Hipment
6 |
P a g e
RECEIVING YOUR INCUBATOR
Before leaving our factory, all SCO Incubators are packaged in high-quality shipping materials to
provide protection from transportation-related damage. When the unit departs the factory, safe
delivery becomes the responsibility of the carrier. Damage sustained during transit is not covered
by the incubator warranty.
This makes it important that you inspect your SCO Incubator for concealed loss or damage to its
interior and exterior when receiving it. If you find any damage to the unit,
follow the carrier’s
procedure for claiming damage or loss.
The orientation photos on the following pages may serve as a useful visual guide for inspections.
I
NSPECTING THE
S
HIPMENT
Carefully inspect the shipping carton for damage. Report any damage to the carrier service that
delivered the incubator. If the carton is not damaged, open the carton and remove the contents.
The unit should come with an Installation and Operation Manual, warranty card, and a Certificate of
Compliance.
Verify that the correct number of the following accessories are present:
Included Accessories
Model
CO
2
Tubing Kit
Shelves
Shelf Clips
115V Power Cord
SCO58
1
6
36
1
SCO40
1
6
24
1
SCO31
1
6
24
1
Carefully check all packaging before discarding. Save the shipping carton until you are sure
everything works properly.