SeaLand 966 Series - Manual (Page 4)

960 SERIES PORTABLE TOILETS
Dometicmarinetoiletsystemsmustbeinstalled
accordingtoDometic’srecommendedprocedures.
Equipment damage, injury to personnel or
death could result from improper installation.
DOMETIC SANITATION CORPORATION
ACCEPTSNORESPONSIBILITYORLIABILITY
FORDAMAGETOEQUIPMENT,ORINJURYOR
DEATH TO PERSONNEL THAT MAY RESULT
FROMIMPROPERINSTALLATION,SERVICEOR
OPERATIONOFTHISPRODUCT.
WARNING!
HAZARD OF FLOODING–Ifthetoilet
system is connected to ANY through-the-hull
fittings, properly installed seacocks MUST be
installedinallpipingconnectedtothrough-the-
hullfittings.SeacocksMUSTbeeasilyaccessible
to all users of the toilet system or secondary
valves fitted in hoses where they are easily
accessible.ALWAYScloseseacockswhentoilet
systemisnotinuse(evenifboatisunattended
forabriefperiod.AllvalvesMUSTbefullbore
valvesandmarinequality.Screw-to-closegate
valvesarenotrecommended.Failuretocomply
canresultinfloodingwhichcancauselossof
propertyandlife.
WARNING!
HAZARD OF FLOODING – If toilet is
connectedtoANYthrough-the-hullfittings,ALL
flexiblehosesmustbeofmarinesanitationquality
and must be secured to ANY fittings (such as
thoseatseacock,ventedlooportoilet)withtwo
stainlesssteel,worm-drivehosebandclampsat
eachconnection.ConnectionsMUSTbechecked
frequently for integrity. Failure to comply can
result in flooding which can cause loss of
propertyandlife.
WARNING!
HAZARD OF FLOODING–Iftoiletrim
isbelowthewaterlineatANYtime(duringany
conditionsofheel,loadortrim)andisconnected
to ANY through-the-hull fittings, properly
positioned ventilated (vented) loops MUST be
installedindischargepipingtopreventpotential
backsiphonageofseawaterintotheboat.Failure
todosocanresultinfloodingwhichcancause
lossofpropertyandlife.
INSTAllATION
Models 964, 965
Models 964MSD, 965MSD
WARNINGS
BESURETOREADINSTRUCTIONSCOMPLETELYBEFOREINSTALLINGPORTABLETOILET.
1. Positionportabletoiletindesiredlocation.
Makesureofadequateclearanceforlid
andseatin“up”positionandclearanceat
thesidestounlatchandremovetoptank.
2. Opensideclaspsbypullingoutwardattop
ofsideclasps.
3. Placehold-downbrackets,withmounting
holesfacingawayfromtoilet,underthe
tankandalignwithgrooves.SeeFigure1.
4. Usepencilorawltomarklocationofhold-
downbracketmountingholes.
5. Removeportabletoilet.
6. Attachhold-downbracketstotheflooror
deckwithscrewsprovided.
7. Setportabletoiletbetweenbracketsand
latchinplacewithsideclasps.
MOUNTING BRACKETS
Figure 1