En table of contents 2 general safety instructions – SeaLand 8100 Series MasterFlush Installation User Manual
Page 3
![background image](/manuals/710713/3/background.png)
3
2.1
Warnings – marine applications
The following statements must be read and understood before installing, servicing and/or
operating this product on a boat. Modification of this product may result in property damage.
Dometic recommends that a qualified marine technician or electrician install or service this product .
Equipment damage, injury to personnel or death could result from improper installation . DOMETIC
ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR DAMAGE TO EQUIPMENT, OR INJURY OR DEATH
TO PERSONNEL THAT MAY RESULT FROM IMPROPER INSTALLATION, SERVICE OR OPERATION
OF THIS PRODUCT .
Dometic 8100 Series MasterFlush Toilet
Notes on using the manual
1
Notes on using the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4
3 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12
6
Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1
Notes on using the manual
Note
Supplementary information for operating the device .
fig.
1
A, page 2 : This refers to an element in an illustration . In this example, item A in
figure 1 on page 2 .
Caution!
Safety Instruction: Failure to observe this instruction can cause material damage and
impair the function of the device .
Caution! Hazard of Flooding
If the toilet is connected to ANY through-the-hull fittings, properly installed seacocks MUST
be installed in all piping connected to through-the-hull fittings . Seacocks MUST be easily
accessible to all users of the toilet or secondary valves fitted in hoses where they are easily
accessible . All valves MUST be full bore valves and of marine quality . Screw-to-close gate
valves are not recommended . Failure to do so can result in flooding which can cause loss
of property and life .
EN
Table of contents
2
General safety instructions
The manufacturer will not be held liable for claims for damage resulting from the following:
• Faulty assembly or connection
• Damage to the unit from mechanical influences, misuse or abuse
• Alterations to the unit without express written permission from the manufacturer
• Use for purposes other than those described in the operating manual