beautypg.com

Maintenance / winterizing / service, 7maintenance / winterizing / service – SeaLand 4700 Series VacuFlush Operation Manual User Manual

Page 8

background image

8

SeaLand 4700 Series VacuFlush Toilet

Operation

6.4

Indicator lights

“OK TO FLUSH” GREEN INDICATOR

Wall Switch

DVS01 Panel

A steady green “OK to Flush” light indicates when the toilet
is ready to flush . A momentary flashing green light indicates
when flush mode is changing .

“DO NOT FLUSH” RED INDICATOR

Wall Switch

DVS01 Panel

VacuFlush vacuum status is monitored by VFS
wall switch or DVS01 panel. Follow instruc-
tions for monitor installed with your toilet.

A red “Do Not Flush” red light indicates two toilet system
conditions:
1 . Vacuum level in toilet system is not sufficient for com-

plete flush .

2 . Holding tank is full and should be pumped out (tank

must be equipped with “full tank” sensor) . When the red
light is on, electrical power to the toilet is interrupted to
prevent possible overfilling of the holding tank . Flush
ball will open only in “Service” mode .

6.5

Service mode

To clean the toilet bowl or perform other service that requires keeping the flush ball open without
running water, use the Service switch .

TOILET WITH VACUFLUSH WALL SWITCH

1 . Push the Service switch for three seconds . The steady backlight will change to

a flashing light while the toilet is in Service mode .

2 . Perform the service operation . After the Service operation is complete,

press the Service switch for three seconds to change back to

normal toilet operation .

TOILET WITH FLUSH HANDLE
1 . Open cap on top of toilet (fig .

1

11, p . 2), then insert pencil

or screwdriver to push Service switch . This opens flush ball .

2 . Perform the service operation . To close the flush ball and

return to Normal operation, push the switch again .

7

Maintenance / winterizing / service

7.1

Cleaning the toilet

To maintain the toilet’s original, lustrous appearance, use
SeaLand

®

Toilet Bowl Cleaner or other non-abrasive bathroom

and toilet bowl cleaners . Please follow label directions .

Caution
To avoid damaging the toilet system’s seals and
valves, do not clean toilet with abrasive cleaners,
caustic chemicals, or lubricants and cleaners that
contain alcohols or petroleum distillates .