Canon BJC-8200 - Manual (Page 75)

A printout is unclear, faded
Troubleshooting
73
Make sure the printer is switched on.
In the software application, from the File menu, select
Page Setup.
• The procedure you use to open the printer driver may
differ slightly, depending on the software application
that you are using.
Click the Utilities button.
Make sure the Print Head Cleaning panel is displayed.
Click the (Print head deep cleaning) icon.
• You can also execute print head deep cleaning with
the printer control panel. Press and hold down the
RESUME button until you hear two beeps and release.
Read the message and click the OK button.
• Print head deep cleaning begins and the POWER/ERROR lamp
flashes for 1 minute until deep cleaning is completed. Wait for the
POWER/ERROR lamp to stop flashing. When the POWER/ERROR
lamp lights and remains on, you can resume printing.
Print a nozzle check pattern to check the results of the
print head deep cleaning.
• After executing print head cleaning five times, and print head deep
cleaning, if the results of the nozzle check pattern are still not
satisfactory, the BJ Print Head may be damaged or worn out.
Replace the BJ Print Head.
• Printing a nozzle check pattern (P.68)
• Replacing the BJ Print Head (P.77)
Reference
7.
6.
Memo
5.
4.
3.
Memo
2.
1.
ON
Macintosh
Click!
Click!
Click!
A B C D E
F
chap-4 (E) 10/2/99 6:34 AM Page 73