Q note, Are philips monitors plug-and-play, Warning – Philips 271P4QPJEB-27 User Manual
Page 45: Q12: whyismydisplaynotshowing, Sharp text, and is displaying jagged characters, Troubleshooting & faqs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10.Troubleshooting & FAQs
1. ColorTemperature:The six settings are
5000K, 6500K, 7500K, 8200K, 9300K
and 11500K. With settings in the 5000K
range the panelappears "warm, with a
red-white colortone'', while a 11500K
temperature yields "cool, bluewhite
toning".
2. sRGB:This is a standard setting for
ensuring correct exchange of colors
between different device (e.g. digital
cameras, monitors, printers, scanners,
etc).
3. User Defne:The user can choose his/
her preference color setting by adjusting
red, green blue color
Q Note
A measurement ofthe color of light radiated
by an object while it is being heated.This
measurement is expressed in terms of
absolute scale, (degrees Kelvin). Lower Kevin
temperatures such as 2004K are red; higher
temperatures such as 9300K are blue. Neutral
temperature is white, at 6504K.
Q9:
Ans.:
Q10:
Ans.:
Q11:
Ans.:
Can I connect my monitor to any PC,
workstation or Mac?
Yes. AllPhilips monitors are fully
compatible with standard PCs, Macs
and workstations.You may need a cable
adapterto connect the monitorto
your Mac system. Please contact your
Philips sales representative for more
information.
Are Philips monitors Plug-and-Play?
Yes, the monitors are Plug-and-Play
compatible with Windows 7/Vista/XP/
NT, Mac OSX, Linux
What is Image Sticking, or Image Burn-
in, or After Image, or Ghost Image in
monitor panels?
Uninterrupted display ofstillor static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging",
on your screen. "Burn-in", "after
imaging", or "ghost imaging" is a well-
known phenomenon in monitor panel
technology In most cases, the "burned
in" or "atter-imaging" or "ghost imaging"
willdisappear gradually over a period of
time afterthe power has been switched
off.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen
refresh application ifyourmonitorwill
display unchanging static content.
© Warning
Failure to activate a screen saver or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that willnot disappear and cannot be
repaired.The damage mentioned above is not
covered underyourwarranty.
Q12:
WhyismyDisplaynotshowing
sharp text, and is displaying jagged
characters?
Ans.:
Your monitorworks best at its native
resolution of 1920 x 1080 @ 60 Hz. For
best display, please use this resolution.
43