3 remove the base assembly for vesa mounting, Note, Setting up the monitor – Philips 271P4QPJEB-27 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Setting up the monitor
2.3 Remove the Base Assembly for
VESA Mounting
Before you start disassemblingthe monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1.
Extend the monitor base to its maximum
height.
2. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.Then lift the monitor
stand.
© Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
3. While keeping the release button pressed,
tilt the base and slide it out.
This manual is related to the following products: