When you select “analog 6ch – Philips DVD855AT User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RETURN/
CLEAR
3
■ 3
HtIUKN
o
If you press the RETURN/CLEAR button while a menu appears on the screen, you will
return to the previous menu screen.
When you select “Analog 6Ch” (
Make the follow settings for the built-in 5.1 ch surround decoder.
1) Select an item by pressing the
a
/
t
buttons, and press the ENTER button.
2) Make the settings (see below) by pressing
ihe
A./T
/■
buttons, and press the
ENTER button.
turn
1
C{C«nl«r]$peok«r
S{SvrrMmd}SpMker
Subwoofer
[•a
Center Channel May
isa
Surround Channel May E23
jTettTone
___
C(Center)
On:
When you connect center speakers.
Speaker
Off:
When center speakers are not connected.
S(Surround)
On:
When you connect surround speakers.
Speaker
Off:
When surround speakers are not conneoted.
Subwoofer
On:
When you connect a sub woofer.
Off:
When a sub woofer is not connected.
C.S.Speaker
Large: When the main speakers can reproduce low frequency signals below 120 Hz.
Size
Small: When the main speakers cannot reproduce low frequency signals below 120 Hz.
• Adjusting the delay time:
When enjoying 5.1 ch surround playback, it is ideal to choose a listening position that is the same distance
from each speaker. By adjusting the delay time of the center/surround speakers, you oan virtually create an
ideal listening environment (as if the center/surround speakers were at their ideal locations respectively as
below.)
Center Channel 0msec: When Df equals Dc.
Delay
1 msec: When (A) is approx. 34 cm (13 inch)
2msec: When (A) is approx. 68 cm (27 inch)
3msec: When (A) is approx. 102 cm (40 inch)...
*(A) = Df-Dc
Get your optimum value ( 0 , 1 , 2 . . . 5)
dividing (A) by 34.
Surround
0msec: When Df equals Ds.
Channel Delay
1 msec: When (B) is approx. 34 cm (13 inch)
2msec: When (B) is approx. 68 cm (27 inch)
3msec: When (B) is approx. 102 cm (40 i n c h ) . . .
*(B) = D f - D s
Get your optimum value ( 0 , 1 , 2 . . . 15)
^11 speakers should be located within a
dividing (B) by 34.
circle with a radius of Df.
A / T
◄ /►
3) Select “Test Tone" and press the ENTER button.
The DVD video player outputs a test signal to each speaker.
Press the ◄ / ► buttons to switch the receiving speakers, and adjust the channel
balance on the amplifier so that each signal is heard at its appropricate volume
level.
(Continued)
39