Philips DVD855AT - Manual (Page 15)

Connections J For details of output sound, see |||>.
Connecting to an Audio System and TV with
Coior Difference inputs
You can listen to the sound of discs in stereo and enjoy the enhanced picture quality of discs on a TV equipped with
color difference inputs.
Connecting to an Audio System and TV with Color Difference Inputs
Selecting the output sound
From the on-screen displays, set the “Audio Out Seiecf to “Anaiog 2ch.”
To wall outlet
difference video inputs
Color difference outputs/inputs
Some TVs or monitors are equipped with color difference inputs. Connecting to these inputs aiiows you to enjoy higher
quaiity picture piayback.
Actual labels for color difference inputs may vary depending on the TV manufacturer, (ex. Y, R-Y, B-Y or “Component
video”)
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
i<5
• Refer to the owner’s manual of the connected equipment (TV, audio system) as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, piace the DVD video
piayer away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Othen/vise, the speakers may be damaged by a sudden high voiume sound.
• Turn off the amplifier before you connect or disconnect the DVD video piayer’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
13